การศึกษาการประหยัดพลังงานไฟฟ้าโดยใช้มาตรฐานการควบคุมคุณภาพ ซิกซ์ ซิกม่า

Authors

  • พิทธินันท์ สมไชยวงค์
  • นิติพงษ์ สมไชยวงค์
  • สมพงษ์ กูลแล
  • วุฒิชัย คิดดี

Keywords:

Six Sigma, Quality Control standards

Abstract

          บทความนี้นำเสนอการศึกษามาตรการประหยัดพลังงานของอาคารวิศวกรรมไฟฟ้า มหาวิทยาลัยเทคโนโลยีราชมงคลล้านนา เชียงราย โดยใช้มาตรฐานการควบคุมคุณภาพ ซิกซ์ ซิกม่า (Six Sigma) จากการศึกษาข้อมูล และสภาพปัญหาพบว่าพลังงานไฟฟ้ามีค่าใช้จ่ายค่อนข้างสูง จึงเป็นสาเหตุให้มีการศึกษามาตรการประหยัดพลังงาน โดยทำการบันทึกการใช้พลังงานไฟฟ้าในห้องตัวอย่าง 5 ห้อง ซึ่งประกอบไปด้วยห้องพักอาจารย์ (ห้องพักรวม), ห้องพักอาจารย์ (ห้องพักเดียว) และห้องเรียน (3 ห้อง) ทำการวิเคราะห์หาการใช้พลังงานไฟฟ้าตามขั้นตอนของมาตรฐานการควบคุมคุณภาพ ซิกซ์ ซิกม่า ด้วยการวัดประสิทธิภาพของกระบวนการปัจจุบัน (ก่อนปรับปรุง) และการปรับปรุงประสิทธิภาพในการทดลอง (หลังปรับปรุง) ทำการปรับปรุงกระบวนการตาม ซิกซ์ ซิกม่า 5 ขั้นตอน คือ 1. การกำหนดปัญหา 2. การวัดประสิทธิภาพ 3. การวิเคราะห์ 4. การปรับปรุง 5. การควบคุม ผลที่ได้จากการตรวจวัด และวิเคราะห์ปริมาณการใช้พลังงานไฟฟ้าปัจจุบัน มีการใช้พลังงานไฟฟ้า 92.38KWh และหลังจากการปรับปรุงกระบวนการ สามารถลดปริมาณการใช้พลังงานไฟฟ้าที่ใช้เหลือ 77.77KWh สามารถประหยัดพลังงานไฟฟ้าได้ 14.61KWh ลดลงร้อยละ 16 คิดเป็นเงินต่อเดือน 8,268.53 บาท ซึ่งกระบวนการที่มีผลต่อการลดลงของปริมาณการใช้พลังงานไฟฟ้าคือกระบวนการที่ 4 และ 5 ตามลำดับ            This article presents the study of energy saving measures of electrical engineering buildings, Rajamangala University of Technology Lanna, Chiang Rai. This study used Six Sigma quality control standards. The studied data and the problematic conditions found that electricity cost was relatively high. Therefore, the energy saving measures were studied by recording electrical energy in five sample rooms, including Instructor room (lounge and personal offices) and classrooms (3 rooms). Data was analyzed for electrical energy usage in accordance with the Six Sigma quality control procedures by measuring the efficiency of the current process an improving the efficiency of the experiment (after adjustment). The Six Sigma improvement process were (1) define, (2) measure, (3) analysis, (4) improve and (5) control. Measurement results and the current electricity consumption analyzed revealed that the electric power consumption was 92.38 KWh and after the improvement process could reduce the amount of electricity consumed to 77.77 KWh. This could save energy about 14.61 KWh or 16% which cost 8,268.53 baht per month. The processes that affect the reduction of electricity consumption were processes No.4 and No 5, respectively.

Downloads